WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click
November 16th, 2026

Thermal CTP Threshold Effect: Binary Imaging Explained

Why thermal CTP imaging is binary, not proportional. The threshold effect, the 120–150 μJ/cm² exposure window, and how coating design controls dot boundary precision.
November 9th, 2026

Why 830nm Is the Wavelength Thermal CTP Settled On

Why 830nm is the standard wavelength for thermal CTP imaging — laser durability, coating absorption chemistry, and what it means for plate selection. Part 1 of Thermal CTP Imaging Explained.
November 2nd, 2026

CTP Plate Quality Control: 4 Inspection Checkpoints

A four-checkpoint CTP plate quality control guide covering incoming, post-imaging, post-development, and pre-press inspection. Learn which instruments to use at each stage.
October 26th, 2026

CTP-S Maintenance Guide: Daily Habits & Plate Baking

Daily, weekly, and monthly maintenance habits for CTP-S thermal plates — plus plate baking rules, batch-switch calibration, and processing checklists to extend run length.
October 19th, 2026

Common CTP-S Thermal Plate Defects and How to Fix Them

Diagnose and fix the three most common CTP-S thermal plate defects: toning, scratches, and dot loss. Step-by-step troubleshooting for CTP plate toning, scratches, and dot loss.
October 12th, 2026

Pre-Press Checks for CTP-S Thermal Plates: Inspection and Fountain Solution

Two pre-press checks prevent most on-press problems: visual inspection and fountain solution control. Learn pH, conductivity, and IPA targets for CTP-S thermal plates.
October 8th, 2026

How to Process CTP-S Thermal Plates for Maximum Run Length

Learn how to process CTP-S thermal plates for maximum run length. CTP plate developer temperature, replenishment rates, bath life, and thermal CTP processing best practices.
September 28th, 2026

How to Handle CTP-S Thermal Plates Without Defects

Learn how to handle CTP-S thermal plates correctly: wear gloves, keep the plate room clean, store flat, and load carefully to avoid fingerprints, dust, and pressure marks.
September 20th, 2026

How to Store CTP-S Thermal Plates Correctly

Learn how to store CTP-S thermal plates correctly: ideal temperature (15–27°C), humidity (below 65%), stacking limits, 12-month shelf life, and FIFO rotation. Avoid plate damage.
August 23rd, 2026

Process-Free vs Traditional CTP Plates: Which Is Right for You?

Compare process-free plates vs traditional CTP plates: workflow, cost savings, environmental impact, and print quality. Learn if it's time for your print shop to upgrade with BOCICA.
Leave a message
Name
Email *
WhatsApp
Message *
We will help you to get the best printing solution. Please leave your problem.
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.